Search Term(s)

Topics

Grades

Contributed By

Shared With

Standards

  • Matched/Aligned to Standards:
  • Linked Standards:

    Audience: Tool For

    Audience: Beneficiary

    Resource Type

    Resource Options

    • Free/Non-commercial Resources:
    Displaying 1-20 of 59 resources
    • Thumb image for Algebra Puzzle InteractiveResource Type: Website / HyperLink

      Algebra Puzzle Interactive

      Grades: 6 to 9
      Subjects: Mathematics
      This is a wonderful interactive for either familiarizing students with the concept of an equation, or reviewing the meaning behi...
      Contributor: Brian Ausland
      Views: 0Favorites: 0
    • Thumb image for Understanding Degree, Minutes, and Seconds as AnglesResource Type: Website / HyperLink

      Understanding Degree, Minutes, and Seconds as Angles

      Grades: No grades selected.
      Subjects: Engineering & Design
      The concept of this lesson was created to help students improve instinctive math skills. Students learning will include understa...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for 1/4" Scaled Floor Plan Drawing of Student's Home- lesson 1 of 4Resource Type: Website / HyperLink

      1/4" Scaled Floor Plan Drawing of Student's Home- lesson 1 of 4

      Grades: No grades selected.
      Subjects: Engineering & Design
      This project is prepared with four lesson plans: Scaled Floor Plans, Wall Framing Detail, Roof Framing Detail, and Exterior Wall...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for **Introduction to BAR "Write it Right" video and procedures (updated) by David EspinozaResource Type: Website / HyperLink

      **Introduction to BAR "Write it Right" video and procedures (updated) by David Espinoza

      Grades: 10 to 12
      Subjects: Transportation
      This unit includes Bureau of Automotive Repair guidelines and expectations pertaining to completing a repair order. This unit al...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Dial Indicating Mill ViseResource Type: Website / HyperLink

      Dial Indicating Mill Vise

      Grades: 9 to 12
      Subjects: Manufacturing & Product Development
      David Hunt This lesson is designed as a very basic first assignment for introducing students to the milling machine. It will all...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for THE PLUMB BOB - LESSON NUMBER FIVEResource Type: Website / HyperLink

      THE PLUMB BOB - LESSON NUMBER FIVE

      Grades: 9 to 12
      Subjects: Manufacturing & Product Development
      Actual work on the plumb bob begins. Students will perform cuts on angles using a lathe.
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Biofuel Enzyme KitResource Type: Website / HyperLink

      Biofuel Enzyme Kit

      Grades: No grades selected.
      Subjects: Health Science & Medical Technology
      Fossil fuels are currently the dominant source of energy. America needs to find alternative forms of energy production. Cellulos...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Small  Metal HammerResource Type: Website / HyperLink

      Small Metal Hammer

      Grades: 7 to 12
      Subjects: Manufacturing & Product Development
      By: Lance Gunnersen This lesson/project is designed as an introduction to metal working using basic hand and power tools. It als...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Abrasive Cutoff Saw Usage by Steve GambrilResource Type: Website / HyperLink

      Abrasive Cutoff Saw Usage by Steve Gambril

      Grades: No grades selected.
      Subjects: Manufacturing & Product Development
      Students will learn to properly and safely use the cutoff saw and know the importance of proper adjustments.
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Box and Cover Project Part 2Resource Type: Website / HyperLink

      Box and Cover Project Part 2

      Grades: No grades selected.
      Subjects: Manufacturing & Product Development
      In this second part of the Box and Cover Project, the student will produce a sheet metal cover for the box produced in part one,...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Drawing Requirements/Material Scheduels & Deadlines for the "Architectural Kitchen Design Project" (4 of 4)Resource Type: Website / HyperLink

      Drawing Requirements/Material Scheduels & Deadlines for the "Architectural Kitchen Design Project" (4 of 4)

      Grades: 10 to 12
      Subjects: Engineering & Design
      This lesson will be the last lesson in the series and will model kitchen floor plan drawing, kitchen elevation detail drawings,...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Enchanted Mind TangramsResource Type: Website / HyperLink

      Enchanted Mind Tangrams

      Grades: TK/K to 12
      Subjects: Visual Arts & Performing Arts, Data Analysis, Statistics, and Probability, Geometry, Measurement & Geometry and 2 additional..
      This site from Enchanted Mind features several interactive Java tangram puzzles. A brief description and history of tangrams is ...
      Contributor: Thinkfinity
      Views: 0Favorites: 0
    • Thumb image for Check That Digit Activity SheetResource Type: Document

      Check That Digit Activity Sheet

      Grades: 9 to 12
      Subjects: Number Sense, Mathematics
      This reproducible worksheet, from an Illuminations lesson, guides students as they learn how modular arithmetic is applied to UP...
      Contributor: Thinkfinity
      Views: 0Favorites: 0
    • Thumb image for The King of TidesResource Type: Website / HyperLink

      The King of Tides

      Grades: 6 to 8
      Subjects: Science, Earth & Space Science, Data Analysis, Statistics, and Probability, Calculus, Mathematics
      This lesson, from Internet4Classrooms and reviewed for grades 6-8 by Illuminations, encourages students to explore the moon s ef...
      Contributor: Thinkfinity
      Views: 0Favorites: 0
    • Thumb image for Architectural Kitchen Design Project - Seven Residential Kitchen Styles (2 of 4)Resource Type: Website / HyperLink

      Architectural Kitchen Design Project - Seven Residential Kitchen Styles (2 of 4)

      Grades: 10 to 12
      Subjects: Engineering & Design
      In this lesson, the students will be led in a brainstorming/discovery session on residential kitchen design and the 7 kitchen st...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Metal Bench-Tom BoyesResource Type: Website / HyperLink

      Metal Bench-Tom Boyes

      Grades: No grades selected.
      Subjects: Manufacturing & Product Development
      This is a project that can be given as a first Fabrication project. This lesson will challenge the entry-level student to make a...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Floor Plan using Revit, Part 2 of 2Resource Type: Website / HyperLink

      Floor Plan using Revit, Part 2 of 2

      Grades: No grades selected.
      Subjects: Engineering & Design
      In this second part lesson, students will learn how to create their floor plan using Revit. They will follow along with demonstr...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Dresser Top Valet - Design and PlanningResource Type: Website / HyperLink

      Dresser Top Valet - Design and Planning

      Grades: 11 to 12
      Subjects: No subjects selected.
      Dresser Top Valet Cabinet Project: Student will begin construction of a dresser top cabinet. The cabinet has two drawers constru...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Basic 3 View Drawing-Board Drafting by Ben OrozcoResource Type: Website / HyperLink

      Basic 3 View Drawing-Board Drafting by Ben Orozco

      Grades: No grades selected.
      Subjects: Engineering & Design
      Students will create a basic 3 view drawing (front, top, right side views) using 1/4" graph paper. These views will be derived f...
      Contributor: CTE Online
      Views: 0Favorites: 0
    • Thumb image for Measurement Calculations- Mike MederosResource Type: Website / HyperLink

      Measurement Calculations- Mike Mederos

      Grades: No grades selected.
      Subjects: Agriculture & Natural Resources
      In this lesson students will apply linear, area and volume formulas to measure items found in and around the shop area. This le...
      Contributor: CTE Online
      Views: 0Favorites: 0